Park-It Car Stop Parking Blocks

Rubber Speed Bumps | Portable Speed Bumps | Parking Blocks and Stops

Park-It Car Stop Recycled Rubber Parking Blocks

Roadtech Park-It Car Stop Blocks are used in parking facilities to effectively stop cars pulling into parking spots, helping protect vehicles and the surrounding infrastructure. Unlike asphalt, concrete or plastic parking curbs, which need frequent replacements, Park-It rubber wheel stops are more forgiving of vehicles, sturdier and do not break or need to be replaced.

Roadtech Park-It Car Stop Blocks come with pre-molded holes and can be shipped with anchoring spikes or lag bolts for installation. They are lightweight and can be easily installed by one person. The flexible design conforms to the contour of uneven road surfaces. Designed to withstand extreme temperature variants, the car stops are resistant to moisture, oil, and ultraviolet light. They will not warp, crack, chip, or rot.

Roadtech Park-It Car Stop Blocks are available in 4', and 6' lengths. In-molded reflective tape is available in yellow, white, or (handicap) blue.

Car stops are covered by a 3 year warranty.

INSTALLATION HARDWARE

Installing
On: Required
Hardware:Spikes
Needed:

Asphalt
Spikes or Lag
Bolts & Shields4 per curb

Concrete
Lag Bolts
& Shields4 per curb

Available In 4', and 6' lengths

Roadtech Park-It Car Stops

1-1011-2021-50

4'$39.99$36.99$34.99

6'$49.99$47.99$45.99

Spikes and hardware pricing not included

Spikes asphalt kit $19.99 (per Block)

Concrete Kit $17.99 (per Bock)

Features:

Made from 100% recycled rubber
In-molded, reflective highway tape available in: yellow, white, or blue (for handicapped parking spaces)
Low profile is more forgiving than concrete - rubber Park-Its will not damage low front-end vehicles
Pre-drilled with holes for easy installation
Car stop can be easily removed for storage / relocation
Flexible design conforms to the contour of uneven road surfaces
Resistant to moisture, oil, temperature variations and ultraviolet light
Lightweight - can easily be installed on asphalt or concrete surfaces by 1 person!
Long lasting and cost efficient
Ideal for indoor or outdoor parking
Will not chip, crack, or fade
High visibility at night
Can be installed on any road surface
Temporary or permanent installation
1/10th the weight of standard concrete curb
Maintenance free
3 year warranty

Product Description :

1. Material: compression molded composite of the 100% recycled rubber and polyurethane prepolymer
2. Physical properties of the rubber composite:
  a) Density 0.6 oz/cu in (ASTM C642)
  b) Durometer Hardness 65A ± 7 (ASTM D2240)
  c) Tensile Strength* minimum 210 psi (ASTM D412)
      (* main structural areas)
  d) Compression deformation 10% at 70psi, 68°F (ASTM D575)
  e) Brittleness at Low temperature: -40°F (ASTM D746)
  f) Freeze and thaw when exposed to deicing chemicals (ASTM C672)
  g) Coefficient of thermal expansion 8 x10-5 in/in/°F (ASTM C531)
  h) Weathering 70 hours at 158°F (ASTM D573)
hardness retained 100% (± 5%)
compressive strength 100% (± 5%)
tensile strength 100% (± 5%)
elongation retained 100% (± 5%)
3. Available models: 6', 4', 3' and 22" lengths
4. Finishing: Black with in-molded reflective pavement marking tape in yellow, blue or white parallelograms

Technical Specs
Product Name: Rubber Car Stop
Models: 6', 4', 3', 22" lengths